• YEBO B017 special head tightening workstation with rigid torque arm, mechanical clamp and constrained-access fixture
  • YEBO B017 offset open-ended special head and threaded adapter on a mechanically clamped customer-owned nutrunner
  • YEBO B017 special head reaching a recessed bolt inside a constrained workspace fixture
  • YEBO B017 special head workstation with rigid reaction arm, fixture and optional position control
1 4

HB Torque YEBO B017 Offset Special Head Tightening Workstation | Interfaces A–F

HB Torque YEBO B017 Offset Special Head Tightening Workstation | Interfaces A–F

ENGINEERED TO ORDER

Request an Engineering Review

Send your workpiece, tightening-tool or process details. Our team will review torque, reach, movement, positioning and traceability requirements.

Request a Quote

A complete engineered workstation for the YEBO B017 special head. HB Torque integrates the B017 offset, open-ended tightening head with a rigid torque reaction arm, mechanical clamp, workbench and application fixture for fasteners located in constrained or obstructed spaces.

YEBO B017 adapter interfaces

Interface a b (mm) c (mm) d (mm) Øe (mm) Øh (mm)
A M34×1 3.5 9.5 2 14 28
B M41×1 0.5 9 6 18 37
C M45×1.5 1 8 8 22.5 40
D M58×1.5 8 15 8 26.5 49
E M68×2 3.5 13.5 12.5 31 62
F M82×2 1.5 14 17.5 39 75

Selection information required by the catalog

  1. Tightening tool brand, model, maximum torque and maximum speed
  2. Bolt minimum tightening torque (MIN) and maximum tightening torque (MAX)
  3. Available working space and access geometry

HB Torque workstation scope

  • Rigid torque reaction arm sized for the confirmed application
  • Mechanical clamp and B017 special-head integration
  • Industrial workbench and constrained-access fixture
  • Optional position sensing for guided bolt-sequence control

Catalog data boundary: the catalog identifies B017 as a special head and gives adapter interfaces A–F, but it does not publish an exact B017 submodel or a standalone torque rating. Compatibility, torque capacity and speed must therefore be confirmed from the selected tightening tool, bolt requirements and available workspace.

Supply boundary: the third-party tightening tool, controller, battery and accessories shown or referenced are not included unless separately specified and lawfully supplied. The quoted HB Torque package covers the approved engineered workstation and B017 integration. No hooks, chains, spring balancers or load-bearing cables are used.

Request an engineered quotation or browse Assembly Automation.

View full details