HB Torque Durofix RVP2058 & RVS2058 20V Brushless Torque Tool Workstation | Reaction Arm Integration

HB Torque engineers a complete torque reaction arm workstation for customers using Durofix RVP2058 and RVS2058 20V brushless preset torque tools. A custom rigid adapter connects the tool's front gearbox to the reaction arm so tightening reaction torque is transferred into the workstation structure while the pistol grip, trigger, display and battery remain accessible.

Durofix RVP2058 & RVS2058 1–24 N·m Torque Reaction Arm Workstation

This is an engineered workstation integration, not a standalone third-party tool listing. The system can include the bench or line-side support structure, articulated or carbon-fiber reaction arm, model-specific split clamp, fixture interface and optional process-control accessories.

• Rigid mechanical connection from the workstation to the tool gearbox
• Compatible adapter design for Durofix RVP2058 and RVS2058 series geometries
• Reaction-arm reach and movement configured for the customer's fastening pattern
• Tool grip, trigger, display and 20V battery remain accessible
• Suitable for bench assembly and automotive line-side tightening applications

Verified Tool Models and Ranges

The supplied catalog lists the following compatible Durofix model families:

• RVP2058-WR8: 1–8 N·m, 50–1,200 rpm
• RVP2058-WR18: 3–18 N·m, 50–800 rpm
• RVP2058-3-WR8 / WR18 / WR24: 1–8, 3–18 or 6–24 N·m
• RVS2058-WR8 / WR18 / WR24: 1–8, 3–18 or 6–24 N·m
• RVS2058-3-WR18 / WR24: 3–18 or 6–24 N·m

Catalog specifications show a 20 V brushless motor, model-dependent 1/4-inch hex or 3/8-inch square drive, approximately 1.00 kg tool weight without battery, and Cmk greater than 1.67 at ±7% under the stated test basis. Final suitability is confirmed against the customer's exact model and process.

Optional Workstation Integration

• Articulated or carbon-fiber torque reaction arm
• Custom machined split clamp for the tool nose or gearbox
• Fixture plate and workpiece locating system
• Barcode scanner, process display or bolt-sequence guidance
• Tool storage, battery charging and line-side accessory mounts

Compatibility Notice

Durofix and the listed RVP2058 / RVS2058 model names identify customer-owned tools that the HB Torque workstation can be engineered to support. Third-party tools are not included unless separately and lawfully supplied.

Need a higher-torque solution above 24 N·m? Compare the Durofix RVS2078 cordless torque multiplier workstation.

Request an Engineering Review

Send the exact tool model, fastening orientation, target torque, working reach, bolt pattern and fixture drawing. HB Torque will configure the reaction arm, rigid adapter and workstation layout for the application.